Posted: January 8th, 2021

What is the area in acres of an area one chain on a side, engineering homework help

Question description

1. 
What is the area in acres of an area one chain
on a side?
2. 
In taping from point A to point B, a distance of
865.47 feet how many pins should the rear chainperson have in hand when holding
the tape to measure the final 65.47 feet?
3. 
In question 2, how many pins should the front
chainperson have in hand when holding his/her end of the tape over point B?
4. 
The distance from station 0+00.00 to station
10+00.00 is along a constant slope, where the rise in elevation between the two
station is 11.00 feet. To accurately measure this distance along the slop
(i.e., not horizontally), what actual distance would have to be measured? Use
both methods show in class; is there a difference?
5. 
A distance of 687.35 feet was measured on level
ground with a tape that was 100.00 feet in length when the temperature was 98 F,
what is the corrected length?
6. 
A line was measured on level ground when the
temperature was 68 F was found to be 668.24 feet in length. Later, the tape was
calibrated and found to be 99.98 feet in length. What is the corrected length
of this line?
7. 
 A tape that was 100.03 feet in length at 68 F
was used when the temperature was 25 F. the difference in elevation along the
line was 8.00 feet. If the recorded (measured) length was 984.12 feet, what is
the corrected length?

Tags: Ace-myhomework Assignment, Affordable College Homework, APA Citation Assignment Help, Custom Essay Writing