The Satellite Of Communications Engineering Essay

Frequency range of satellite communications is (3-30) GHz and satellite is usually designed to have a typical operating life time of 10 to 15 years. The satellites are two types passive and active. Passive satellite acts as reflector which reflects signal from transmitting ground station to receiving ground station. The active satellite consisting of power supplies, Transmitting & receiving antennas and transponders. The satellite receives the signal from ground station ( This is called Uplink) using receiving antenna, removes the noise, frequency down converted, signal strength is increased and then transmitted to ground station (This is called Down conversion).

The satellite uses two different frequencies for down link and up link to avoid the interference between strong transmitting station and weak receiving station. 4/6 GHz, 11/14 GHz and 20/30 GHz are used for uplink and down links. Uplink frequency is always greater then the down link frequency for effective utilization of power in the satellite.

Which Citation Styles Can You Handle?

We get a lot of “Can you do MLA or APA?”—and yes, we can! Our writers ace every style—APA, MLA, Turabian, you name it. Tell us your preference, and we’ll format it flawlessly.

Satellite is launched in three orbits i.e. Low Earth Orbit (760 km to 1800 km), Medium Earth Orbit (10,000 km) and GEOstationary orbit GEO (35,786 km). LEO and MEO are used for domestic applications and GEO is used at international level. The Velocity of the satellite in the satellite is equal to earth velocity; hence the satellite is called synchronous satellite. Three synchronous satellites are enough to cover total earth surface.

Satellite Sub Systems

Altitude and Orbit Control System (AOCS)

This system consists of rocket motors that are used to move the satellite back to the correct orbit when external forces cause it to drift off station & gas jets or inertial devices that control the altitude of the satellite. Altitude & orbit of the satellite must be controlled so that the satellite antennas points towards the earth.

The effects on the satellite are gravitational fields of the sun & moon, irregularities in the earth’s magnetic fields, solar pressure from the sun and variations in the earth’s magnetic field. Solar pressure from the sun and earth’s magnetic field creates eddy currents in the satellite metallic structure & tends to cause rotation of the satellite body. Moon’s gravitational force is twice the sun’s gravitational force.

Two methods are used for this control i.e. 1) Spin Stabilization in which body of the satellite is rotated from (30-100) rpm to cancels the forces from sun, earth and moon. 2) Three-axis stabilization in which motors are rotated in x, y, z directions to cancels the forces from sun, earth and moon. Rotation in x-direction is called roll, pitch and yaw in y & z directions respectively.

Are Writing Services Legal?

Totally! They’re a legit resource for sample papers to guide your work. Use them to learn structure, boost skills, and ace your grades—ethical and within the rules.

2. Telemetry, Tracking, Command & Monitoring System (TTC&M):

Monitoring system collects data from many sensors within satellite & sends data to ground station. The parameters are pressure in the fuel tank, temperature, power, voltage & current information about subsystems like amplifiers, frequency translators etc…This telemetry data is digitized & multiplexed using TDM and transmitted using PSK signaling scheme. Ground controller station is used to monitor, store & decode the telemetry data.

Tracking technique is used to determine the current orbit and altitude of the satellite. Velocity & Acceleration sensors on the satellite can be used to find the changes in the orbit and altitude using last position by integration of data. These sensors are based on principle of Doppler Shift.

Command system is used to make changes in altitude & orbit by sending commands from ground station. This commands structure must posses safeguard against unauthorized attempts. Encryption is used in command field to provide security. TTC&M systems use 20 MHz bandwidth in 4/6 GHz system and uses horn antenna for transmitting & receiving.

What’s the Price for a Paper?

Starts at $10/page for undergrad, up to $21 for pro-level. Deadlines (3 hours to 14 days) and add-ons like VIP support adjust the cost. Discounts kick in at $500+—save more with big orders!

3. Power Supplies:

Satellite obtains electrical power from the solar cells, which converts incident sun light into electrical energy and efficiency of solar cells is (20 to 25)%. Spin stabilized satellite uses cylindrical body covered solar cells and 3-axis stabilized satellite uses the flat plate solar cells. The satellite must carry batteries to power the subsystems during launch and eclipses. Batteries uses nickel-hydrogen type and efficiency is 70% with capacity of (20 to 50) V with capacity of (20-100) Amp-hour.

4. Communication Sub System:

Communication sub system consisting of no. of transponders. Band width of satellite can increase by using polarization and spatial frequency reuse. Transponder consisting of receiving antenna, low noise amplifier (LNA), BPF, MIXER, BPF, low power amplifier(LPA), high power amplifier(HPA) and transmitting antenna. The function of transponder receives signal from ground station, removes noise, frequency down conversion, amplification and transmits to ground station. 4/6 GHz transponder uses single frequency conversion and 11/14 GHz and 20/30 GHz transponders uses double frequency conversion.

Satellite Link Design:

Three factor influences system design:

1. The choice of frequency band (4/6, 11/14 and 20/30) GHz

Is My Privacy Protected?

100%! We encrypt everything—your details stay secret. Papers are custom, original, and yours alone, so no one will ever know you used us.

2. Atmospheric propagation effects.

Rain in the atmosphere attenuates the radio signals. 20/30 GHz suffers four times as much attenuation as on uplink at 14 GHz.

3. Multiple Access techniques.

Received signal power at ground station C=Pr = Pt Gt Gr / ((4πd)/λ))2

Is AI Involved in Writing?

Nope—all human, all the time. Our writers are pros with real degrees, crafting unique papers with expertise AI can’t replicate, checked for originality.

= EIRP . Gr / Path loss

Pt = Transmitted power from the satellite

Gt = Transmitting antenna gain

Gr = Receiving antenna gain

Why Are You the Best for Research?

Our writers are degree-holding pros who tackle any topic with skill. We ensure quality with top tools and offer revisions—perfect papers, even under pressure.

d = Distance between satellite and ground station.

λ = Frequency of operation.

Pt Gt= EIRP (Effective Isotropic Radiated Power)

((4πd)/λ) 2 = Path loss = 22+20 log (d/λ)

Who Writes My Assignments?

Experts with degrees—many rocking Master’s or higher—who’ve crushed our rigorous tests in their fields and academic writing. They’re student-savvy pros, ready to nail your essay with precision, blending teamwork with you to match your vision perfectly. Whether it’s a tricky topic or a tight deadline, they’ve got the skills to make it shine.

Noise temperature in the receiving N= KTB

K = Boltzman constant

T = Receivers noise temperature

B = Band width of noise.

Will My Paper Be Unique?

Guaranteed—100%! We write every piece from scratch—no AI, no copying—just fresh, well-researched work with proper citations, crafted by real experts. You can grab a plagiarism report to see it’s 95%+ original, giving you total peace of mind it’s one-of-a-kind and ready to impress.

C/N α Gr /T This ratio is high for cassegrain antenna.

4/6 GHz Multiplexing:

Up link frequency is said to be around 6 GHz, it has a band width of 500 MHz to accommodate various channels. The frequency range is from 5.925 to 6.425 GHz (a bandwidth of 500 MHz) that incorporates 12 different channels, each channel bandwidth of 36 MHz with a guard band of 4 MHz and 20 MHz for TTC&M with 4 MHz guard band.

(12*36) MHz + (11*4) MHz + 20 MHz + 4 MHz = 500 MHz

Same in the down link.

Can You Use Any Citation Format?

Yep—APA, Chicago, Harvard, MLA, Turabian, you name it! Our writers customize every detail to fit your assignment’s needs, ensuring it meets academic standards down to the last footnote or bibliography entry. They’re pros at making your paper look sharp and compliant, no matter the style guide.

Questions:

A satellite carrying antenna system, transmitter, receiver and power supply is known as

a. Geostationary satellite b. Orbital satellite

c. Active satellite d. Passive satellite

ans: c

Can I Change My Order Details?

For sure—you’re not locked in! Chat with your writer anytime through our handy system to update instructions, tweak the focus, or toss in new specifics, and they’ll adjust on the fly, even if they’re mid-draft. It’s all about keeping your paper exactly how you want it, hassle-free.

The frequency range for satellite broadcasting is

a. (30-300)Mhz b. 30Mhz to 300Ghz

c. 3Ghz to 30Ghz d. 30Ghz to 300Ghz

ans: c

How Do I Order a Paper?

It’s a breeze—submit your order online with a few clicks, then track progress with drafts as your writer brings it to life. Once it’s ready, download it from your account, review it, and release payment only when you’re totally satisfied—easy, affordable help whenever you need it. Plus, you can reach out to support 24/7 if you’ve got questions along the way!

First determining factor in selecting the satellite system is its

a. EIRP b. Antenna size

c. coverage area d. Antenna gain

ans: c

How Quick Can You Write?

Need it fast? We can whip up a top-quality paper in 24 hours—fully researched and polished, no corners cut. Just pick your deadline when you order, and we’ll hustle to make it happen, even for those nail-biting, last-minute turnarounds you didn’t see coming.

A satellite link uses different frequencies for receiving and transmitting in order to

Avoid the interference for terrestrial microwave link

Avoid the interference between its powerful transmitted signal and weak receiving signal

Minimize the free space loses

Maximize antenna gain

Can You Handle Tough Topics?

Absolutely—bring it on! Our writers, many with advanced degrees like Master’s or PhDs, thrive on challenges and dive deep into any subject, from obscure history to cutting-edge science. They’ll craft a standout paper with thorough research and clear writing, tailored to wow your professor.

ans: b

In the equatorial plane only geosynchronous satellite are launched because it is the only the plane which provides

a. 24 orbit b. Stationary satellite

c. Global communication d. Zero gravity

ans: d

How Do You Match Professor Expectations?

We follow your rubric to a T—structure, evidence, tone. Editors refine it, ensuring it’s polished and ready to impress your prof.

6. The usable band width of microwave beacon trasponder for 6/4 Ghz satellite communication is generally

a. 360Mhz b. 30Mhz

c. 1Mhz d. 36Mhz

ans: d

How Do You Edit My Work?

Send us your draft and goals—our editors enhance clarity, fix errors, and keep your style. You’ll get a pro-level paper fast.

7. In satellite communication uplink frequency is greater then downlink frequency because

a. To avoid interference b. power is utilized effectively in satellites

c. To increase antenna gain d. to increase coverage area

ans: b

8. The bandwidth used for tracking, telemetry, command and monitoring system is

Can You Brainstorm Topics?

Yep! We’ll suggest ideas tailored to your field—engaging and manageable. Pick one, and we’ll build it into a killer paper.

a. 36Mhz b. 20Mhz

c. 10Mhz d. 4Mhz

ans: b

9. The gaud band used for 6/4 Ghz transponder is

a. 10Mhz b. 5Mhz

c. 4Mhz d. 6Mhz

ans: c

Do You Offer Fast Edits?

Yes! Need a quick fix? Our editors can polish your paper in hours—perfect for tight deadlines and top grades.

10. The no. of channels used in 6/4 transponder is

a. 5 b. 6 c. 7 d. 12

ans : d

11. The minimum no. of Geosatellites required to cover total earth surface is

a. 2 b. 3 c. 4 d. 5

ans: b

Can You Start With an Outline?

Sure! We’ll sketch an outline for your approval first, ensuring the paper’s direction is spot-on before we write.

12. which of the following carrier modulation scheme is used in TTC & M subsystem

a. ASK b. PSK

c. QAM d. MSK

ans: b

13. Which of the following carrier modulation scheme is used for digital satellite broad casting?

a. QPSK b. ASK c. QAM d. FSK

ans: a

14. The following modulation scheme was used in analog satellite broadcasting

Can You Add Charts or Stats?

Definitely! Our writers can include data analysis or visuals—charts, graphs—making your paper sharp and evidence-rich.

a. AM b. FM

c. DSB-SC d. SSB-SC

ans: b

15. Which of the following antenna has more G/T ratio

a. parabolic reflector b. helical antenna

c. horn antenna d. cassegrain antenna

ans : d

16. which of the following is an analog multiple access technique

a. FDMA b. TDMA

c. CDMA d. CSMA

What About Multi-Part Projects?

We’ve got it—each section delivered on time, cohesive and high-quality. We’ll manage the whole journey for you.

ans : a

17. A geosynchronous orbit is the one when the

a. satellite is placed in an orbit 15,000 miles above the earth’s surface in a north to south orbital path

b. satellite is placed 22,000 miles above the earth’s surface

c. satellite is placed 760 miles above earth’s surface

Do You Adapt to International Rules?

Yes! UK, US, or Aussie standards—we’ll tailor your paper to fit your school’s norms perfectly.

d. the satellite’s orbital velocity is in synchronous with the earth surface.

Ans: d

18. The satellite used for international communication is known as

a. cosset b. domsat

c. marisat d. Intel sat

What does a complex assignment mean?

If your assignment needs a writer with some niche know-how, we call it complex. For these, we tap into our pool of narrow-field specialists, who charge a bit more than our standard writers. That means we might add up to 20% to your original order price. Subjects like finance, architecture, engineering, IT, chemistry, physics, and a few others fall into this bucket—you’ll see a little note about it under the discipline field when you’re filling out the form. If you pick “Other” as your discipline, our support team will take a look too. If they think it’s tricky, that same 20% bump might apply. We’ll keep you in the loop either way!

ans: d

Tags: #1 Dissertation Writing, Academic Paper, Best assignment help, Cheap Essay Writing