The Instrumentation And Measurement Engineering Essay

A single strain gauge having a resistance of 500Ω, gauge factor of 2 and a temperature coefficient of 1 Ã- 10-5 per °C at room temperature is mounted on the beam and connected in the arm AB of the bridge shown in figure Q4 for measuring a strain in cantilaver beam. The other three arms BC, CD and DA of the bridge have resistance of 100Ω, 100Ω and 500 Ω respectively. The detector connected across A and C of the bridge has a resistance (Rg) of 100 Ω and sensitivity 5 mm per µA. The voltage supply to the bridge is 12 V.

Determine the detector deflection for a gauge strain of 0.002.

What Citation Styles Can You Use for My Essay?

Students often ask, “Can you write my essay in APA or MLA?”—and the answer’s a big yes! Our writers are experts in every style imaginable: APA, MLA, Chicago, Harvard, you name it. Just tell us what you need, and we’ll deliver a perfectly formatted paper that matches your requirements, hassle-free.

Given:-

R1 = 500 Ω

R2 = 100 Ω

R3 = 500 Ω

Is It Legal to Use Your Writing Service?

Absolutely, it’s 100% legal! Our service provides sample essays and papers to guide your own work—think of it as a study tool. Used responsibly, it’s a legit way to improve your skills, understand tough topics, and boost your grades, all while staying within academic rules.

R4 = 100 Ω

Resistance across A and C of the bridge, Rg = 100 Ω

α = temperature coefficient of 1 x 10-5 °C

How Much Does It Cost to Get a Paper Written?

Our pricing starts at $10 per page for undergrad work, $16 for bachelor-level, and $21 for advanced stuff. Urgency and extras like top writers or plagiarism reports tweak the cost—deadlines range from 14 days to 3 hours. Order early for the best rates, and enjoy discounts on big orders: 5% off over $500, 10% over $1,000!

Gauge strain, = 0.002

Voltage supply = 12 V

Sensitivity 5 mm / μA

Gauge factor of 2

Will My Use of This Service Stay Private?

Yes, totally! We lock down your info with top-notch encryption—your school, friends, no one will know. Every paper’s custom-made to blend with your style, and we check it for originality, so it’s all yours, all discreet.

Solution:-

When a strain is introduced, the strain sensitivity, which is also called the gage factor (GF), and also the strain is defined as the amount of deformation per unit length of an object when a load is applied. Strain is calculated by dividing the total deformation of the original length by the original length (L).

Substitute all the value that given and find out change in resistance,

After get the change in resistance, ∆R1. Total resistance measured is equal to R1 and R3 in parallel and R2 and R4 in parallel. If strain gauge is changes even a little bit in value can cause the bridge unbalanced and can define that R1 = ∆R1 + R1.

Wheatstone resistive bridge sensors can be analyzed using Thevenin’s Theorem, where the circuit is reduced to voltage sources with series resistance

Do You Use AI to Write Papers?

No way—our papers are 100% human-crafted. Our writers are real pros with degrees, bringing creativity and expertise AI can’t match. Every piece is original, checked for plagiarism, and tailored to your needs by a skilled human, not a machine.

Voltage across the bridge, VAC varies change as strain gauge, R1

So we can determine the voltage across the bridge, VAC terminals by applying the Ohm’s Law.

R is the resistance that across the A and C of the bridge

Lastly, determine the detector deflection for a gauge strain and the deflection are known as below,

Why Choose You for Research Papers?

We’re the best because our writers are degree-holding experts—Bachelor’s to Ph.D.—who nail any topic. We obsess over quality, using tools to ensure perfection, and offer free revisions to guarantee you’re thrilled with the result, even on tight deadlines.

Deflection = Sensitivity x Current, Ig flow at VAC

Deflection = (5 mm / μA) x 29.71 μA

Deflection = 148.55 mm

Determine the change in strain indicated for an increase of 20 °C in room temperature.

Who’s Writing My College Essays?

Our writers are top-tier—university grads, many with Master’s degrees, who’ve passed tough tests to join us. They’re ready for any essay, working with you to hit your deadlines and grading standards with ease and professionalism.

Substitute the value that to the equivalent change in strain

QUESTION 2

A telephone line will be used to carry measurement data as a frequency-modulated signal from 5kHz to 6kHz. The line is shared with unwanted voice data below 500Hz, and switching noise occurs above 500kHz. Design a band-pass RC filter that reduces the unwanted voice by 80% and reduces the switching noise by 90%. Assume CH is 0.05µF, and use a resistance ratio r of 0.02. What is the Vout/Vin on the passband frequency of 5.5kHz?

Given:-

Frequency – modulated signal from 5 kHz to 6 kHz

Are Your Papers Original?

Always! We start from scratch—no copying, no AI—just pure, human-written work with solid research and citations. You can even get a plagiarism report to confirm it’s 95%+ unique, ready for worry-free submission.

Unwanted voice data below 500Hz

Switching noise above 500 kHz

Reduced unwanted voice 80%

Reduced switching noise 90%

Can You Match Any Citation Style?

You bet! From APA to IEEE, our writers nail every style with precision. Give us your guidelines, and we’ll craft a paper that fits your academic standards perfectly, no sweat.

CH = 0.05 μF

Resistance ratio, r = 0.02

First need to find out the low pass filter

Passive RC Low Pass Filter

Can I Update Instructions Mid-Order?

Yep! Use our chat feature to tweak instructions or add details anytime—even after your writer’s started. They’ll adjust on the fly to keep your essay on point.

Also know that the capacitive reactance of a capacitor in an AC circuit is given as below

The High Pass Filter is the exact opposite to the low pass filter. This filter has no output voltage from DC (0Hz), up to a specified cut-off frequency (Æ’c) point. This lower cut-off frequency point is 70.7% or -3dB (dB = -20log Vout/Vin) of the voltage gain allowed to pass.

Passive RC High Pass Filter

Also know that the capacitive reactance of a capacitor in an AC circuit is given as below

How Do I Get an Essay Written?

Easy—place your order online, and your writer dives in. Check drafts or updates as you go, then download the final paper from your account. Pay only when you’re happy—simple and affordable!

After getting value of then substituting to the

Substitute the R1 value to the formula to get the R2 value as well

Using the FCL find out the C2

Band Pass Filter Circuit

Passive RC Band Pass Filter

How Fast Can You Handle Urgent Deadlines?

Super fast! Our writers can deliver a quality essay in 24 hours if you’re in a pinch. Pick your deadline—standard is 10 days, but we’ll hustle for rush jobs without skimping.

Band Pass Filters passes signals within a certain “band” or “spread” of frequencies without distorting the input signal or introducing extra noise. This band of frequencies can be any width and is known as the filters Bandwidth

Band Pass Filter Bode Plot

QUESTION 3

Describe how the sensor control works in cycle with relay in filling and draining water from the tank. Find the value of amplifier gain, K, required to open the valve when the level reached 1.5 m.

Description:-

Input flow Q1 and Q2 fill the tank without controlled. When the level of water in tank reaches the height h = 1.5m, the level sensor sends signal’s voltage, Vh to the amplifier to amplify the voltage to relay’s voltage Vr = KVh with a gain of K, which the voltage of relay will be large enough to drive the relay closes.

As the relay’s voltage reaches Vr = 6V, the relay is closed and activates the valve to open and water in the tank is started to drain out. After some time, the water level drops to 1.1m and the level sensor will read the signal. Again, the voltage Vh is amplified to Vr = 4.8V and latch the relay to open. The open relay is then instructed the valve to close.

Can You Tackle Complex Essay Topics?

Definitely! From astrophysics to literary theory, our advanced-degree writers thrive on tough topics. They’ll research deeply and deliver a clear, sharp paper that meets your level—high school to Ph.D.

Even though the water stops draining out, the water tank is still filling with water. The water level will increase to h = 1.5m again. The same cycle is expected to occur continuously.

Given:-

Level sensor’s voltage, Vh = 0.8h + 0.4V

Relay’s voltage, Vr = KVh

Relay’s voltage closes, Vr = 6V

h = 1.5m

How Do You Meet My Professor’s Standards?

We tailor your paper to your rubric—structure, tone, everything. Our writers decode academic expectations, and editors polish it to perfection, ensuring it’s grade-ready.

Find the amplifier gain, K

Solution:-

Level sensor linear static operating characteristics which is given, Vh = 0.8h + 0.4V. Apply this formula to the voltage relay to get the value of amplifier gain, K. Substitute all the info that given to the relay’s voltage, Vr = KVh

At what level does the valve close?

Given:-

Relay’s voltage closes, Vr = 4.8V

What’s Your Editing Process?

Upload your draft, tell us your goals, and our editors will refine it—boosting arguments, fixing errors, and keeping your voice. You’ll get a polished paper that’s ready to shine.

Level sensor’s voltage, Vh = 0.8h + 0.4V

Amplifier gain, K = 3.75

Solution:-

When the valve close, the voltage of relay, Vr = 4.8V and given that K = 3.75 and substitute to the formula relay’s voltage to get the level, h of valve close.

1.28 = 0.8h + 0.4

0.8h = 0.88

Can You Suggest Paper Topics?

Sure! Need ideas? We’ll pitch topics based on your subject and interests—catchy and doable. Pick one, and we’ll run with it, or tweak it together.

h = 1.1 m

Suppose Q1 = 5 m3/min, Q2 = 2 m3/min, and Qout = 9 m3/min (when open). Determine the time for water level to rise from 1.1 to 1.5 meters and the time to drain out. Find the total time of cycle.

Given:-

Input flow rate (velocity), Q1 = 5m3/min and Q2 = 2m3/min

Output flow rate (velocity), Qout = 9m3/min (when valve open)

Solution:-

Time for water level to rise from 1.1m to 1.5m

Velocity shows how fast an object is moving to which direction. Average velocity can be calculated by dividing displacement over time.

Where the t1 is the time when water start rise at height 1.1m. Assume the t1 = 0 (Initial time)

Do You Offer Rush Revisions?

Yes! If you need quick edits, our team can turn it around fast—hours, not days—tightening up your paper for last-minute perfection.

Time for water level to drain out from 1.5m to 1.1m

Output flow rate (velocity), Qout = 9m3/min (when valve open)

t2 is the time when water reaches 1.1m, water drains out is stopped. Assume t2 = 0

QUESTION 4

A measurement of temperature using a sensor that outputs 6.5 mV/ËšC must measure to 100ËšC. A 6-bit ADC with a 10V reference is used. Develop a circuit to interface the sensor and the ADC. Find the temperature resolution.

Given:-

Output of the sensor = 6.5 mV/ ËšC measure to 100ËšC

6-bit ADC = 10Vref

Can You Provide Outlines First?

Absolutely! We’ll draft an outline based on your topic so you can approve the plan before we write—keeps everything aligned from the start.

Solution:-

Find the output sensor during 100ËšC where the output sensor 6.5 mV/ ËšC measure 1ËšC is given.

Resolution can define electrically, and expressed in volts. The minimum change in voltage required to guarantee a change in the output code level is called the LSB (least significant bit, since this is the voltage represented by a change in the LSB).

The resolution Q of the ADC is equal to the LSB voltage. The voltage resolution of an ADC is equal to its overall voltage measurement range divided by the number of discrete voltage intervals:

N is the number of voltage intervals,

EFSR is the full scale voltage range, 10 V

Normally, the number of voltage intervals is given by,

Where the M is the ADC’s resolution in bits.

Solution:-

Develop a circuit to interface the sensor

Can You Include Data Analysis?

You bet! Need stats or charts? Our writers can crunch numbers and craft visuals, making your paper both sharp and professional.

Block Diagram

Figure 4.1 Interfacing an Analog Output Temperature Sensor to an ADC

At first sensor consists of a band gap reference circuit that produces a voltage.

A switched capacitor op amp amplifier is used to amplify the temperature coefficient to a voltage mV/°C because of the ease of building capacitors that are a ratio of each other.

Lowpass filter is used to remove the switching noise of the amplified signal. The output signal is then driven by a buffer amplifier.

The temperature sensor’s output pin is driven by an op amp that has output impedance (ROUT). The input of the ADC consists of a simple sample and hold circuit.

A switch is used to connect the signal source with a sampling capacitor, while the ADC measures the CSAMPLE capacitor’s voltage in order to determine the temperature. The ROUT and RSWITCH resistances and the CSAMPLE capacitor form a time constant that must be less than the sampling rate (TSAMPLE) of the ADC as shown.

An external capacitor can be added to the output pin to provide additional filtering and to form an anti-aliasing filter for the ADC. This capacitor may impact the time response of the sensor and the designer must allow time for the capacitor to charge sufficiently between ADC conversions.

Also, the sensor amplifier may oscillate if the filter capacitor is too large. A small resistor of approximately 10 to 100Ω can be added between the output pin of the sensor and CFILTER to isolate the sensor’s amplifier from the capacitive load.

The output impedance of the sensor (ROUT) varies as a function of frequency. Thus, a series resistor should be added to the effective ROUT resistance if CFILTER is intended to serve as the ADC’s anti-aliasing filter. The output impedance of the TC1047A is less than 1Ω because operational amplifier A2 functions as a voltage buffer.

How Do You Handle Long-Term Projects?

We break it down—delivering each part on time with consistent quality. From proposals to final drafts, we’re with you all the way.

The output impedance of the sensor is low due to the negative feedback of the buffer circuit topology. The negative feedback results in an output impedance that is equal to the impedance of the amplifier divided by the open-loop gain of the amplifier. The open-loop gain of the op amp is relatively large which, in turn, forces the output impedance to be small.

QUESTION 5

A pressure sensor has a resistance that changes with pressure according to R = (0.15 kΩ/psi)p + 2.5 kΩ. This resistance is then converted to a voltage with the transfer function,

The sensor time constant is 350 ms. At t = 0, the pressure changes suddenly from 40 psi to 150 psi.

What is the voltage output at 0.5 s? What is the indicated pressure at this time?

Given:-

Pressure sensor has resistance changes with pressure, R = (0.15 kΩ/psi)P + 2.5 kΩ

Can You Write for Global Standards?

Yep! Whether it’s UK, US, or Australian rules, we adapt your paper to fit your institution’s style and expectations perfectly.

Transfer function of voltage,

Sensor time constant, Ï„ = 350 ms

At t = 0, Pressure, P change suddenly from 40 psi → 150 psi

Solution:-

Pressure changes suddenly from 40 psi to 150 psi and we can assume that the initial pressure, Po = 150 psi

Voltage output after t = 0.5 sec, find pressure after 0.5 sec first;

Is there a possibility of plagiarism in my completed order?

We write every paper from scratch just for you, and we get how important it is for you to feel confident about its originality. That’s why we double-check every piece with our own in-house plagiarism software before sending it your way. This tool doesn’t just catch copy-pasted bits—it even spots paraphrased sections. Unlike well-known systems like Turnitin (used by most universities), we don’t store or report anything to public databases, so your check stays private and safe. We stand by our plagiarism-free guarantee to ensure your paper is totally unique. That said, while we can promise no plagiarism from open web sources or specific databases we check, no tech out there (except Turnitin itself) can scan every source Turnitin indexes. If you want that extra peace of mind, we recommend running your paper through WriteCheck (a Turnitin service) and sharing the report with us.

Basic formula a quantity pressure depends exponentially on time t if.

During the resistance 0.5 sec, P = 35.95 psi. Substitute the indicated pressure at 0.5s, P in resistance changes with pressure according to to find out the resistance during 0.5 sec

Voltage output at 0.5 s,

2. At what time does the output reach 5.0 V?

When will my order be assigned to the writer?

The moment you place your order, we jump into action to find the perfect writer for you. Usually, we’ve got someone lined up within an hour. Sometimes, though, it might take a few hours—or in rare cases, a few days—if we need someone super specialized. If no writers from your chosen category are free, we’ll suggest one from a lower category and refund the difference if you’d paid extra for that option. Want to keep tabs on things? You can always peek at your order’s status on your personal order page.

Find out the resistance by substitute the output voltage at the formula that giving

Indicated pressure at output 5.0 V

50 psi

A quantity pressure depends exponentially on time t if, substitute the value of initial pressure, indicated pressure output at 5.0 V and time constant is giving 350 ms. Finally we can get the time does the output reach 5.0 V.

,