Looking for a similar answer, essay, or assessment help services?

Simply fill out the order form with your paper’s instructions in a few easy steps. This quick process ensures you’ll be matched with an expert writer who
Can meet your papers' specific grading rubric needs. Find the best write my essay assistance for your assignments- Affordable, plagiarism-free, and on time!

Posted: December 8th, 2023

Spectrum Sensing: Enhanced Energy Detection Technique Based on Noise Measurement

Spectrum Sensing: Enhanced Energy Detection Technique Based on Noise Measurement

Abstract—Spectrum sensing allows cognitive radio systems to identify unused portions of the radio spectrum and then use them while avoiding interferences to the primary users. Energy detection is one of the most used techniques for spectrum sensing because it does not require any prior information about the characteristics of the primary user signal. However, this technique does not distinguish between the signal and the noise. It has a low performance at low SNR, and the selection of the threshold becomes an issue because the noise is uncertain. The detection performance of this technique can be further improved using a dynamic selection of the sensing threshold. In this work, we investigate a dynamic selection of this threshold by measuring the power of noise present in the received signal using a blind technique. The proposed model was implemented and tested using GNU Radio software and USRP units. Our results show that the dynamic selection of the threshold based on measuring the noise level present in the received signal during the detection process increases the probability of detection and decreases the probability of false alarm compared to the ones of energy detection with a static threshold.

What Citation Formats Do You Support?

We hear “Can you write in APA or MLA?” all the time—and the answer’s a big yes, plus way more! Our writers are wizards with every style—APA, MLA, Harvard, Chicago, Turabian, you name it—delivering flawless formatting tailored to your assignment. Whether it’s a tricky in-text citation or a perfectly styled reference list, they’ve got the skills to make your paper academically spot-on.

Keywords—spectrum sensing, energy detection, autocorrelation, matched filter, dynamic threshold, software defined radio, probability of detection, probability of false alarm.

I.     Introduction

Cognitive radio technology has been proposed as a smart solution to solve the problem of spectrum scarcity [1, 2]. Cognitive radio systems detect unused spectrum holes and use them while avoiding interferences to the primary users. These systems perform a 3-process cycle: observing, deciding, and then taking action. In the process of observation, cognitive radio systems perform spectrum sensing to determine the presence or absence of the primary user signal [2, 3]. Several sensing techniques have been proposed to sense the radio spectrum including energy detection [4-8], autocorrelation [9-12], and matched filter based sensing [13,14].

Energy detection [4-8] computes the energy of N samples as the squared magnitude of the FFT averaged over these N samples and compares it to a threshold to get the sensing decision. If this energy is higher than a threshold, then the primary user signal is deemed to be present; otherwise, the primary user signal is considered absent. This technique does not require any prior information about the primary user signal, which makes it much more straightforward than matched filter and autocorrelation sensing technique [5]. However, the performance of this technique is highly dependent on the noise with is random [6]; thus, using a static threshold degrades this performance [7, 8]. A prior knowledge of the noise power or a reliable estimate of its level is then necessary to enhance the sensing detection performance.

The autocorrelation based sensing technique [9-12] computes the correlation function of the received samples with the time-shifted version of these samples at lag zero and lag one. If the value of this function is higher than a certain threshold, then the primary user signal is considered present; otherwise, it is considered absent.  Because the noise is uncorrelated, the autocorrelation-based sensing technique can distinguish between the signal and noise. The accuracy of this sensing technique also depends on the number of samples and the threshold selection. The main drawback of this technique is that it requires a large number of samples to achieve a good performance, and thus, it increases the detection time, which is not practical for cognitive radio systems that have to reduce sensing time and energy consumption [8].

Are Paper Services Legal?

Yes, completely! They’re a valid tool for getting sample papers to boost your own writing skills, and there’s nothing shady about that. Use them right—like a study guide or a model to learn from—and they’re a smart, ethical way to level up your grades without breaking any rules.

Matched filter detection [13, 14] is a technique that matches the received signal with some pre-collected and saved pilots of the same primary user signal stream. The received signal is convoluted with the saved pilots then averaged over N samples to calculate the matched filter decision statistic, which is then compared to a threshold to obtain the sensing decision. If the result of this convolution is higher than a threshold, the primary user signal is considered present; otherwise, it is deemed to be absent. This technique provides better detection at low signal to noise ratio, and it is optimal in the sense that it needs a few samples to achieve a high detection probability in a short sensing time. However, it requires the prior knowledge of the primary user signal characteristics. This knowledge is not always available, which makes this technique unpractical [8].

According to [5, 6, 9], The performance of these three sensing techniques depends on the number of samples and the sensing threshold. Taking more samples can enhance the detection performance of these techniques up to a certain value of SNR, after which further increase in the number of samples does not improve their performance. Increasing the number of samples can also increase the sensing time and in some cases, such as wideband sensing, it is impractical to increase the increase the number of sample when researcher are trying to use compressive sensing to minimize the number of samples [15-16].  The performance can also be enhanced by using a dynamic threshold adapted to the level of noise present in the received signal. In this work, we consider the energy detection based sensing technique to show that measuring the noise and use it to compute the sensing threshold can further enhance its detection performance.

Several works have been done to improve the detection performance of energy detection using a dynamic selection of the threshold [17-22]. For instance, the authors of [17] proposed a dynamic selection of the threshold using Discrete Fourier Transform Filter Bank method to minimize the spectrum sensing error in the presence of noise. This technique uses the Gradient-based updates to set a new value of the sensing threshold. The authors of [18] proposed an adaptive threshold detection algorithm based on an image binarization technique. This technique dynamically estimates the threshold based on previous iteration decision statistics and other critical parameters such as SNR, the number of samples, and the targeted probabilities of detection and false alarm. In [19], the authors proposed an adaptive threshold that consists of two control parameters to adapt the requirements utilizing targeted probability of detection and false alarm. They determined the threshold based on two methods: Constant False Alarm Rate method which consists of fixing a target probability of false alarm and Constant Detection Rate method which sets the target probability of detection. Then, the threshold that Minimizes spectrum sensing error (MSSE) is selected. The authors of [20, 23] proposed a double-threshold algorithm that consists of using two thresholds

How Much for a Paper?

Prices start at $10 per page for undergrad work and go up to $21 for advanced levels, depending on urgency and any extras you toss in. Deadlines range from a lightning-fast 3 hours to a chill 14 days—plenty of wiggle room there! Plus, if you’re ordering big, you’ll snag 5-10% off, making it easier on your wallet while still getting top-notch quality.

λ1and

λ2where

λ1<λ2  instead of using a single-threshold. If the energy of the samples is smaller than

λ1then the spectrum is free and if the energy of samples is higher than

Will Anyone Find Out I Used You?

Nope—your secret’s locked down tight. We encrypt all your data with top-tier security, and every paper’s crafted fresh just for you, run through originality checks to prove it’s one-of-a-kind. No one—professors, classmates, or anyone—will ever know you teamed up with us, guaranteed.

λ2then the spectrum is occupied; otherwise, the secondary user is not sure about the presence or absence of the primary user. However, the authors did not explain how these two thresholds were selected. The authors of [22] addressed the process of the threshold selection by using Constant the False Alarm Rate method. This method consists of making a bound on the probability of false alarm and then maximizing the detection probability. The selection of this threshold is dynamically adapted to noise level present in the received signal. However, the authors did not explain how the noise was estimated, and they used directly the value of noise added to the signal generated in Matlab to validate their approach.

All these previously mentioned papers proposed a dynamic selection of the threshold using different algorithms that take into consideration several parameters such as the noise present in the received signal and the target probability of false alarm. They validated their approaches using simulation. However, in a real-world scenario, several system parameters that are assumed constant in simulations may vary over time, which can result in the wrong sensing decision. Thus, the validation of the proposed models through only simulations using Matlab is not enough.

In this work, we investigate the use of dynamic threshold based on measuring the noise level present in the received signal to enhance the probability of detection and decrease the probability of false alarm. The approach measures the noise using a technique based on the eigenvalues of the sample covariance matrix of the received signal. This technique calculates the eigenvalues, then, uses the Minimum Description Length criterion to split the eigenvalues corresponding to the signal and the ones corresponding to the noise [24- 27]. This technique is considered as blind estimation technique because the power of the signal and the power of the noise are unknown and these parameters are estimated from the received signal.

The rest of this paper is organized as follows. Section II describes the mathematical model of the proposed model and the experimental setup using the GNU Radio software and USRP units. Section III gives and discusses the results. Finally, the conclusions and future work are drawn in section IV.

Do You Rely on AI?

Not even a little—our writers are real-deal experts with degrees, crafting every paper by hand with care and know-how. No AI shortcuts here; it’s all human skill, backed by thorough research and double-checked for uniqueness. You’re getting authentic work that stands out for all the right reasons.

II.    Methodology

A.    Mathematical Model

Spectrum sensing is one of the most important processes in cognitive radio. It aims essentially to decide between two states: primary user signal absent,

H0, or primary user signal present,

H1. These two states can be modeled as:

H0: yn=w(n)

Why Are You Top for Research Papers?

Our writers are Ph.D.-level pros who live for nailing the details—think deep research and razor-sharp arguments. We pair that with top plagiarism tools, free revisions to tweak anything you need, and fast turnarounds that don’t skimp on quality. Your research paper won’t just shine—it’ll set the bar.

(1)

H1: yn=s(n)+w(n)

(2)

where

Who’s Behind My Essays?

You’re in good hands with degree-holding pros—many rocking Master’s or higher—who’ve crushed our tough vetting tests in writing and their fields. They’re your partners in this, hitting tight deadlines and academic standards with ease, all while tailoring every essay to your exact needs. No matter the topic, they’ve got the chops to make it stellar.

ynis the received signal,

s(n)is the transmitted signal, and

w(n)is the noise affecting the transmitted signal.

In the following, we describe the theory behind energy detection and the algorithm used for noise estimation.

Is My Paper Original?

100%—we promise! Every paper’s written fresh from scratch—no AI, no copying—just solid research and proper citations from our expert writers. You can even request a plagiarism report to see it’s 95%+ unique, giving you total confidence it’s submission-ready and one-of-a-kind.

1)   Energy Detection

Energy detection computes the energy of N samples as the squared magnitude of the FFT averaged over N samples [4-8], using the following formula:

TED=∑n=1NY[n]2

(3)

This energy

Can You Do Any Citation Style?

Yep—APA, Turabian, IEEE, Chicago, MLA, whatever you throw at us! Our writers nail every detail of your chosen style, matching your guidelines down to the last comma and period. It’s all about making sure your paper fits academic expectations perfectly, no sweat.

TEDis then compared to the threshold

λDto get the sensing decision

TED< λD

: PU signal absent

Can I Adjust Instructions Later?

Absolutely—life happens, and we’re flexible! Chat with your writer anytime through our system to update details, tweak the focus, or add new requirements, and they’ll pivot fast to keep your paper on point. It’s all about making sure the final draft is exactly what you need, no stress involved.

TED> λD

: PU signal present

Fig.  1. Energy detection

How Do I Get Started?

It’s super easy—order online with a few clicks, then track progress with drafts as your writer works their magic. Once it’s done, download it from your account, give it a once-over, and release payment only when you’re thrilled with the result. It’s fast, affordable, and built with students like you in mind!

The performance of the detection algorithm can be evaluated through the probability of detection

PDand the probability of false alarm

PFA. The probability of detection represents the numbers of correct detections (PU is present) over the total number of sensing trials. It is given by:

Pd=Pr⁡(TED>λD;H1)

How Fast for Rush Jobs?

We can crank out a killer paper in 24 hours—quality locked in, no shortcuts. Just set your deadline when you order, and our pros will hustle to deliver, even if you’re racing the clock. Perfect for those last-minute crunches without compromising on the good stuff.

(4)

The probability of false alarm represents the number of times that the PU is falsely detected over the total number of trials. This probability can be expressed as:

PFA=Pr⁡(TED>λD;H0)

(5)

Where

Can You Handle Complex Subjects?

For sure! Our writers with advanced degrees dive into any topic—think quantum physics or medieval lit—with deep research and clear, sharp writing. They’ll tailor it to your academic level, ensuring it’s thorough yet easy to follow, no matter how tricky the subject gets.

TEDcorresponds to the energy of N samples given by

Eq. 3and

λDis the sensing threshold.

According to [15], the probabilities of detection

Pdand false alarm

How Do You Meet Prof Standards?

We stick to your rubric like glue—nailing the structure, depth, and tone your professor wants—then polish it with edits for that extra shine. Our writers know what profs look for, and we double-check every detail to make sure it’s submission-ready and grade-worthy.

Pfaare given by:

Pd=Q(λ-N(σW2+σs2)(σW2+σs2)2N)

(6)

Pfa=Q(λD-NσW2σW22N)

What’s Your Editing Like?

Send us your draft and tell us your goals—we’ll refine it, tightening arguments and boosting clarity while keeping your unique voice intact. Our editors work fast, delivering pro-level results that make your paper pop, whether it’s a light touch-up or a deeper rework.

(7)

Where Q-function

Q(x)=12π∫x∞exp⁡-u22du,

σwand

σsare the standard deviation of the noise and the PU signal, respectively, and N is the number of samples.

Can You Pick My Topic?

Yes—we’ve got your back! We’ll brainstorm fresh, workable ideas tailored to your assignment, picking ones that spark interest and fit the scope. You choose the winner, and we’ll turn it into a standout paper that’s all yours.

In [19], the authors gives the formula of the detection-threshold

λD, which is obtained from Eq. 7 and  given by:

λD=σW2(Q-1(Pfa)2N+N))

(8)

Where

Q-1(.)is the inverse of the Q-function.

This threshold depends on the noise variance, the number of samples, and the target probability of false alarm. Thus, a prior knowledge on the level of noise affecting the received signal is required to set an accurate threshold.

Do You Do Quick Revisions?

Yep—need changes fast? We’ll jump on your paper and polish it up in hours, fixing whatever needs tweaking so it’s ready to submit with zero stress. Just let us know what’s off, and we’ll make it right, pronto.

2)   Noise Estimation

The noise is estimated based on the eigenvalues of the sample covariance matrix of the received signal[24-27]. In the following, this technique is described.

The received signal,

y, is expressed as a

N×Lmatrix as:

y=y1,1⋯y1,N⋮⋱⋮yL,1⋯yL,N

(9)

Can You Outline First?

Sure thing! We’ll whip up a clear outline to map out your paper’s flow—key points, structure, all of it—so you can sign off before we dive in. It’s a handy way to keep everything aligned with your vision from the start.

Where

yi,jis the vector of the received signal samples.

The noise and the signal are assumed to be independent, and the noise is assumed to be white Gaussian noise components with mean 0 and variance

σW2, therefore the Eq. 1 and Eq. 2 can be rewritten as:

H0: yin=wi(n)

(10)

H1: yin=si(n)+wi(n)

(11)

Can You Add Data or Graphs?

Absolutely—we’ll weave in sharp analysis or eye-catching visuals like stats and charts to level up your paper. Whether it’s crunching numbers or designing a graph, our writers make it professional and impactful, tailored to your topic.

Where

yiis the received signal component,

siis the transmitted component, and

wiis the noise component.

Given an observation bandwidth

B, a transmitted signal with occupied bandwidth

bin the sample covariance matrix eigenvalues domain, and M<=L, the

MLfraction of the whole observation bandwidth is occupied by the transmitted signal, and the rest of the bandwidth is the occupied by noise. When

L,N→∞, the statistical covariance matrices of the noise, of the transmitted samples, and of the received samples are defined as:

RW=EwnwHn=σW2.IL ; -∞<n<+∞  (12)

How Do You Manage Big Projects?

We tackle each chunk with precision, keeping quality consistent and deadlines on track from start to finish. Whether it’s a dissertation or a multi-part essay, we stay in sync with you, delivering top-notch work every step of the way.

Rs=Es(n)sH(n)

(13)

Ry=Ey(n)yH(n)

(14)

Where

Do You Follow Global Academic Rules?

Yes—we’ve got it down! Our writers switch seamlessly between UK, US, Australian, or any other standards, matching your school’s exact expectations. Your paper will feel native to your system, polished and ready for wherever you’re studying.

RWis the noise statistical covariance matrix,

Rsis the transmitted signal statistical covariance matrix,

Ryis the received signal statistical covariance matrix,

(.)Hdenotes complex conjugate transpose,

σW2is the noise variance, and

What is a progressive delivery and how does it work?

Progressive delivery is a cool option where we send your paper in chunks—perfect for big projects like theses or dissertations. You can even pay for it in installments. It’s just 10% extra on your order price, but the perks are worth it. You’ll stay in closer touch with your writer and can give feedback on each part before they move to the next. That way, you’re in the driver’s seat, making sure everything lines up with what you need. It saves time too—your writer can tweak things based on your notes without having to redo huge sections later.

ILis the L-order identity matrix.

Since the signal and the noise are independent, we have the following equation,

Ry=Rs+RW=Rs+σW2.IL

(15)

I received some comments from my teacher. Can you help me with them?

Absolutely! If your teacher’s got feedback, you can request a free revision within 7 days of approving your paper—just hit the revision request button on your personal order page. Want a different writer to take a crack at it? You can ask for that too, though we might need an extra 12 hours to line someone up. After that 7-day window, free revisions wrap up, but you can still go for a paid minor or major revision (details are on your order page). What if I’m not satisfied with my order? If your paper needs some tweaks, you’ve got that free 7-day revision window after approval—just use the “Revision” button on your page. Once those 7 days are up, paid revision options kick in, and the cost depends on how much needs fixing. Chat with our support team to figure out the best way forward. If you feel the writer missed the mark on your instructions and the quality’s off, let us know—we’ll dig in and sort it out. If revisions don’t cut it, you can ask for a refund. Our dispute team will look into it and figure out what we can offer. Check out our money-back guarantee page for the full scoop.

Given the eigenvalues

λyof

Ryand

λsof

Rsin a descending order, we get,

λyi=λyi+σW2 ∀i=1,2…M

(16)

λyi=σW2 ∀i=M+1,M+2, …L

(17)

Where denotes the group of eigenvalues and the statistical covariance matrix eigenvalues are equal to signal components power.

The estimate of the received statistical covariance matrix

Rŷcan be calculated instead of statistical covariance matrix as there exists a finite number of samples. The sample covariance matrix of the received signal is given by:

R̂y=1NyyH

(18)

The eigenvalues of the samples covariance matrix deviate from the signal power components and follow Marcenko Pastur density, which depends on the value of

LN. The value of M is estimated using the Minimum Descriptive Length criterion. The estimated value of M is denoted as

M̂̂and given by:

M=argminM⁡-L-MNlog⁡φMθM+12M2L-Mlog⁡N;0≤M≤L-1

Tags: Assessment Brief Assignment Help, Australia dissertation writers, Help write my thesis paper in UK, I need help with my Homework

Order|Paper Discounts

Why Choose Essay Bishops?

You Want The Best Grades and That’s What We Deliver

Top Essay Writers

Our top essay writers are handpicked for their degree qualification, talent and freelance know-how. Each one brings deep expertise in their chosen subjects and a solid track record in academic writing.

Affordable Prices

We offer the lowest possible pricing for each research paper while still providing the best writers;no compromise on quality. Our costs are fair and reasonable to college students compared to other custom writing services.

100% Plagiarism-Free

You’ll never get a paper from us with plagiarism or that robotic AI feel. We carefully research, write, cite and check every final draft before sending it your way.