Recognition Properties for Pyrrole

Preparation of molecularly imprinted polymer and its recognition properties for pyrrole

• X.W. Wu, J. Wang, H.X. Wang [1], Q.M. Zhou, L.H. Liu. wang, Y.P. Wu, H.W. Yang, G.L. Zhao, S.X. Tuo

 

What Citation Formats Do You Support?

We hear “Can you write in APA or MLA?” all the time—and the answer’s a big yes, plus way more! Our writers are wizards with every style—APA, MLA, Harvard, Chicago, Turabian, you name it—delivering flawless formatting tailored to your assignment. Whether it’s a tricky in-text citation or a perfectly styled reference list, they’ve got the skills to make your paper academically spot-on.

Abstract: The molecularly-imprinted polymer (MIP) of pyrrole was synthesized by a precipitation polymerization method using acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker agent in acetonitrile. MIP of pyrrole was characterized by FT-IR and UV. The surface morphology and specific surface area of the MIP was characterized by Scanning Electron Microscope (SEM) and nitrogen adsorption (BET). The adsorption behavior of the MIP was investigated in detail, which showed high selectivity for pyrrole, the results indicated that the maximum binding capacities of pyrrole on the MIP and the non-imprinted polymer (NIP) were 404 and 265 μmol·g⁻¹, respectively. Application of MIP with a high selectivity to pyrrole provides a novel method for separating and purifying the trace nitrogenous heterocyclic compounds from tobacco.

Keyword: molecularly imprinted polymer, pyrrole, tobacco, nitrogenous heterocyclic compounds

1 INTRODUCTION

The Pyrrole and other nitrogenous heterocyclic compounds in tobacco leaves come mainly from the reaction products formed by the reaction of sugar and amino acid[1-3], which play an important role in sensory quality of tobacco and tobacco products. They are the important parameters to evaluate the sensory quality of tobacco products and have great effects on the sensory characteristics of tobacco products and on the health of smokers[4]. Therefore, the studies and analysis of nitrogenous heterocyclic compounds are conducive to improve the quality of perfuming and tobacco products.

Are Paper Services Legal?

Yes, completely! They’re a valid tool for getting sample papers to boost your own writing skills, and there’s nothing shady about that. Use them right—like a study guide or a model to learn from—and they’re a smart, ethical way to level up your grades without breaking any rules.

Molecular Imprinting, as an interdiscipline derived from polymer chemistry, material science, and biological chemistry, is the method of preparing the polymer with particular selection to given template molecules[5-8]. So far, dozens of countries, (i.e., America, Japan, Germany, Australia, France and China) hundreds of academic institutions and enterprises have been working on the research and development of the molecularly imprinted polymer (MIP).Thanks to MIP is simple in preparation and can be easily preserved, with specific selectivity, high temperature, high pressure and acid corrosion, it has been widely used in the solid phase extraction[9], chromatography analysis [10], membrane separation [11], biomimetic sensor[12], ect.

The separation of bioactive ingredients in natural products is difficult because of their low contents, complex structures and diversity[13-15]. Compared with traditional methods (high performance liquid chromatography, silica gel column chromatography, etc.), molecular imprinting method has the advantages of high molecular recognition, simple operation, low solvent consumption and recyclable[16]. Thus, the molecularly imprinting technique has attracted considerable attention for extraction of compounds from complex mixtures of chemical species[17-18]. However, to the best of our knowledge, no molecularly imprinted polymer has been reported for the separation and determination of pyrrole in tobacco so far.

In this study, pyrrole imprinted polymer was synthesized by employing acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking. After the characteristics and analysis of the MIP and NIP, the adsorption behavior including kinetics and isotherms are discussed in detail. It was found that the MIP can specifically adsorb and identify pyrrole molecules, which meant the MIP can be applied to separation and enrichment of trace pyrrole in tobacco. The aim of this paper is to provide theoretical basis and technical supports for further study of the effects of nitrogen heterocyclic compound on tobacco quality.

How Much for a Paper?

Prices start at $10 per page for undergrad work and go up to $21 for advanced levels, depending on urgency and any extras you toss in. Deadlines range from a lightning-fast 3 hours to a chill 14 days—plenty of wiggle room there! Plus, if you’re ordering big, you’ll snag 5-10% off, making it easier on your wallet while still getting top-notch quality.

2 EXPERIMENTAL

2.1 Reagents

Pyrrole, pyridine and methanol were obtained from Sinopharm Chemical Reagent Co., Ltd. (Shanghai, China). Acrylamide, methacrylic acid, acetonitrile and azodiisobutyronitrile were purchased from Tianjin Kermel Chemical Reagent Company (Tianjin, China). Ethylene glycol dimethacrylate was obtained from Aladdin reagent co., LTD (Guangdong, China). All the solvents were of analytical reagent grade and used without further purification.

2.2 Synthesis of MIP and NIP

Will Anyone Find Out I Used You?

Nope—your secret’s locked down tight. We encrypt all your data with top-tier security, and every paper’s crafted fresh just for you, run through originality checks to prove it’s one-of-a-kind. No one—professors, classmates, or anyone—will ever know you teamed up with us, guaranteed.

The pyrrole imprinted polymer was prepared by precipitation polymerization in the following procedures. 0.1 mmol of pyrrole and 0.4 mmol of AM were dissolved in 20 ml of acetonitrile in a 40 mL glass vessel. The mixture was sonicated at room temperature for 30 minutes for pre-polymerization, and then was incubated at 4℃°C for 12 h. Subsequently, 2 mmol of cross-linker (EGDMA) and 10 mg of initiator (AIBN) were added stepwise. The glass vessel was degassed in a sonicating bath for 10 min, and filled with nitrogen for 30 min, and then sealed for polymerization at 60 °C for 24 h in a thermostat water bath. After polymerization, the resultants were extracted with a mixed solvent of methanol/acetic acid (9:1, v/v) for 48 h in a Soxhlet extractor to remove the template from its polymeric matrix, followed by ethanol for another 48 h to remove the acetic acid. The obtained MIP was dried in an oven at 60 °C overnight. As a control, the NIP was prepared and treated under identical conditions except for the omission of the template.

2.3 Morphological characterization

The FT-IR spectra were recorded to characterize the MIP and NIP on an AVATAR 360 ESP FT-IR spectrometer (Nicolet, America). SEM images were obtained with afield-emission scanning electron microscope (FE-SEM, JSM-6700F, JEOL, Japan). The nitrogen adsorption/desorption data of MIP and NIP was determined using an ASAP2020Micromeriticsapparatus (Micromeritics Instruments, USA).

2.4 Binding experiments

Do You Rely on AI?

Not even a little—our writers are real-deal experts with degrees, crafting every paper by hand with care and know-how. No AI shortcuts here; it’s all human skill, backed by thorough research and double-checked for uniqueness. You’re getting authentic work that stands out for all the right reasons.

The binding experiments were carried out at 30 °C and 150 rpm on an orbital shaker with 100 mg of the MIP and NIP in a 100 mL flask containing pyrrole in 20 ml of acetonitrile. Batch experiments were performed to examine the adsorption kinetics and equilibrium. In the kinetic adsorption experiments, 2.5 mmol·L-1 pyrrole in acetonitrile was used. The adsorption isotherm experiments were conducted with the initial pyrrole concentration ranging from 0.2 to 5.0 mmol·L-1 for 2 h. After the adsorption, the concentration of the substrates in the supernatant solutions was determined via an UV-2450 Ultraviolet Spectrophotometer (Shimadzu, Japan). The binding capacity of pyrrole and the analogs was calculated from the equation:

(1)

Where: Q stands for the binding capacity (μmol·g−1), C0 and C are the initial and the residual concentrations (mmol·L-1) of pyrrole, respectively, V is the solution volume (mL), and m is the amount (mg) of the MIP or NIP used for the adsorption experiments.

3 RESULTS AND DISCUSSION

Why Are You Top for Research Papers?

Our writers are Ph.D.-level pros who live for nailing the details—think deep research and razor-sharp arguments. We pair that with top plagiarism tools, free revisions to tweak anything you need, and fast turnarounds that don’t skimp on quality. Your research paper won’t just shine—it’ll set the bar.

3.1 Interaction between pyrrole and the functional monomers

In order to investigate the feasibility of imprinted pyrrole, two different functional monomers MAA and AM were investigated for the formation of complex with the template. The maximum absorption wavelength of pyrrole was measured by the UV-2450 Ultraviolet Spectrophotometer. As shown in Fig.1, compared with MAA, AM demonstrated much stronger interaction with pyrrole for the non-existent absorbance of pyrrole. It is possible that the complex of pyrrole with AM was formed via hydrogen bonding between N–H of pyrrole and –CONH₂ of AM due to the pre-polymerization.

Fig.1 Interaction between pyrrole and functional monomers

Who’s Behind My Essays?

You’re in good hands with degree-holding pros—many rocking Master’s or higher—who’ve crushed our tough vetting tests in writing and their fields. They’re your partners in this, hitting tight deadlines and academic standards with ease, all while tailoring every essay to your exact needs. No matter the topic, they’ve got the chops to make it stellar.

3.2 The molar ratio of pyrrole to the monomer

In order to elucidate the recognition mechanism on a molecular level, spectrophotometric analysis was employed in the pyrrole imprinting process. A series solution were prepared in acetonitrile, in which the molar ratio of pyrrole and AM varied at 1:0, 1:2, 1:4 and 1:6, respectively. After equilibrium for 12 h, absorption spectrums of the mixture were measured via an UV-2450 Ultraviolet Spectrophotometer. As shown in Fig.2, the absorbance decreased with the increasing concentration of AM, When the molar ratio of pyrrole and AM up to 1:4, the absorption peak of pyrrole disappeared, which indicated that the pyrrole had reacted with AM completely. While molar ratio of pyrrole and AM exceeded 1:4, the excess of AM could self-associate, and formed non-specific binding site, which makes the adsorption mass transfer resistance increase and is not conducive to the preparation of molecularly imprinted polymer. Therefore, the optimal molar ratio of pyrrole and AM is 1:4.

Fig.2 Absorption spectra of pyrrole with different proportion of AM in acetonitrile

Is My Paper Original?

100%—we promise! Every paper’s written fresh from scratch—no AI, no copying—just solid research and proper citations from our expert writers. You can even request a plagiarism report to see it’s 95%+ unique, giving you total confidence it’s submission-ready and one-of-a-kind.

3.3 Characteristics of MIP and NIP

3.3.1 Characterisation of MIP and NIP by FT-IR spectra

Pyrrole, AM, EGDMA, MIP (before and after eluting templates) and NIP were compared to affirm the successful preparation of MIP by FT-IR spectra. The FT-IR spectra of the MIP before and after removal of template pyrrole are presented in Fig.3a and Fig.3b, respectively. The –NH stretching vibration band of monomer AM (Fig.3e) appeared at 3580 cm^-1 in the spectra of MIP before pyrrole removal (Fig.3a), which indicated that the template pyrrole formed hydrogen bonding interaction with monomer AM, this band is shifted to a higher wavenumber (at 3585 cm^-1) after removal of pyrrole in MIP (Fig.3b). A conspicuous band at 1648 cm^-1 in the spectra of MIP before removal of template pyrrole is ascribed to -C=C- aromatic ring stretching vibration of pyrrole (Fig.3d). This band disappeared after removal of pyrrole in MIP (Fig.3a) and was not observed in spectra of NIP (Fig.3c) due to absence of pyrrole. The peak at 3597cm^-1 inFig.3c corresponds to the –NH stretching of monomer AM in the FT-IR spectra of NIP. The absorption peaks of MIP and NIP were similar, which means that both MIP after eluting templates and NIP have the same chemical components.

Fig.3 IR spectra of (a) MIP before eluting template, (b) MIP after eluting template , (c) NIP, (d) pyrrole, (e) AM

3.3.2 Morphology of MIP and NIP

The morphology of MIP and NIP was shown in Fig.4. As shown in Fig.4 (a), the prepared polymer is microsphere and the particle is uniform, which indicated the spherical particle can be synthesized at the best experiment condition. The MIP microsphere has a narrow and small particle size, and the average diameter is 2μm. As for NIP, the microsphere with a narrow but big particle size, and the average diameter is 3μm. Much imino exist in the template molecule, which may suppress the polymerization, results in the bigger particle size of NIP compared with MIP. Besides, the whole reaction system polarity increased with the added template molecule, the solubility of MIP decreased, so that MIP precipitated from the whole reaction system early, which can also generate the bigger particle size of NIP.

Fig.4 SEM micrographs of (a) MIP, (b) NIP.

3.3.3 Characterization of specific surface area

Table 1 lists the results of nitrogen adsorption experiments for MIP and NIP particles. It can be seen that the specific surface area and the average pore diameter were different for MIP and NIP particles.

Table1 Structure parameters of MIP and NIP

How Do I Get Started?

It’s super easy—order online with a few clicks, then track progress with drafts as your writer works their magic. Once it’s done, download it from your account, give it a once-over, and release payment only when you’re thrilled with the result. It’s fast, affordable, and built with students like you in mind!

	specific surface area a (m2/g)	pore diameter b (nm)
MIP	1.81 How Fast for Rush Jobs? We can crank out a killer paper in 24 hours—quality locked in, no shortcuts. Just set your deadline when you order, and our pros will hustle to deliver, even if you’re racing the clock. Perfect for those last-minute crunches without compromising on the good stuff.	36.76
NIP	1.61	44.07

^a Measured by Brunauer–Emmett–Teller (BET) method.

Can You Handle Complex Subjects?

For sure! Our writers with advanced degrees dive into any topic—think quantum physics or medieval lit—with deep research and clear, sharp writing. They’ll tailor it to your academic level, ensuring it’s thorough yet easy to follow, no matter how tricky the subject gets.

^b Measured by Barrett–Joyner–Halenda (BJH) method.

3.4 Binding performance of MIP and NIP

3.4.1 Absorption isotherms and kinetic of pyrrole on the MIP and NIP

The absorption isotherm curves of pyrrole on the MIP and NIP were plotted in Fig.5. The absorption capacity was increased gradually with increasing initial concentration of pyrrole in the range of 0.2-5.0 mmol·L⁻¹. In the higher concentration range, the binding capacity was close to be stable. The binding data can be analyzed by Langmuir equation:

(2)

How Do You Meet Prof Standards?

We stick to your rubric like glue—nailing the structure, depth, and tone your professor wants—then polish it with edits for that extra shine. Our writers know what profs look for, and we double-check every detail to make sure it’s submission-ready and grade-worthy.

Where Q stands for the binding capacity (μmol·g⁻¹), Q_max is the maximum binding capacity (μmol·g⁻¹), C_eq is equilibrium concentration of pyrrole (mmol·L⁻¹), and B is a constant. In order to calculate the maximum binding capacity of pyrrole on both MIP and NIP, this equation was changed into Eq. (3):

(3)

Eq. (3) shows a linear relationship between C_eq/Q and C_eq. From the slope of the linear plot, the maximum binding capacities of pyrrole on the MIP and NIP were calculated to be 404 and 265 μmol·g⁻¹, respectively, which means that the maximum binding capacity of pyrrole on MIP was 1.52 times of that on NIP. In addition, under the same experimental conditions, the adsorption capacity of the MIP at each concentration was higher than that of the NIP. It was indicated that MIP offered a higher affinity for the template molecule than NIP.

Fig.5 Adsorption isotherms of pyrrole on MIP and NIP

3.4.2 Binding kinetic curve of pyrrole pyrrole on the MIP

As shown in Fig.6, the adsorption kinetic curves of pyrrole on MIP and MIP were shown at the pyrrole concentration of 2.5 mmol·L⁻¹ in acetonitrile. It can be seen that the binding capacity of MIP increased rapidly in the period of 0-60 min, and then the increments were reduced on the stage of 60-80 min, and the saturated binding was observed after 80 min.

Fig.6 Adsorption kinetic curves of pyrrole on MIP and NIP

Can You Pick My Topic?

Yes—we’ve got your back! We’ll brainstorm fresh, workable ideas tailored to your assignment, picking ones that spark interest and fit the scope. You choose the winner, and we’ll turn it into a standout paper that’s all yours.

3.4.3 Selective adsorption

In the selective adsorption test, the target molecule pyrrole and the competitive one pyridine possess similar structure and co-exist in tobacco extract as nitrogenous heterocyclic compounds. As we can see in Table 2, it is obvious that the absorption capacity of pyrrole and pyridine of MIP was much higher than that of the NIP. The selectivity of MIP was 2.17 times higher than that of NIP, which suggested that the imprinting process significantly improved adsorption selectivity to the template.

Table 2 Binding capacity of different substrates on MIP and NIP

	QMIP(μmol•g−1)	QNIP(μmol•g−1)	ΔQ(μmol•g−1)
Pyrrole Do You Do Quick Revisions? Yep—need changes fast? We’ll jump on your paper and polish it up in hours, fixing whatever needs tweaking so it’s ready to submit with zero stress. Just let us know what’s off, and we’ll make it right, pronto.	139.01	99.62	39.39
Pyridine	36.40	18.25 Can You Outline First? Sure thing! We’ll whip up a clear outline to map out your paper’s flow—key points, structure, all of it—so you can sign off before we dive in. It’s a handy way to keep everything aligned with your vision from the start.	18.15

4 CONCLUSIONS

In this paper, the pyrrole molecularly imprinted polymer was synthesized via the facile precipitation-polymerization method. The prepared polymer is microsphere and the diameter is about 2 μm. The binding property experiments indicated the imprinted polymer can adsorb the pyrrole molecule selectively. Moreover, the adsorb effect of MIP is stronger than NIP. The selective adsorption experiments demonstrated the synthesized MIP microsphere has the obvious selective adsorption effect with pyrrole molecule when compared the similar structure pyridine. This work provided theoretical basis for the new direction of separation and purification in the field of tobacco with pyrrole and other heterocyclic compounds.

5 ACKNOWLEDGEMENT

This work was supported by China Tobacco Hunan Industrial Co., Ltd, Technology research and development center project (2011-JC-0001)

REFERENCES

1. Kulshreshtha, N. P., & Moldoveanu, S. C. (2003). Analysis of pyridines in mainstream cigarette smoke. Journal of Chromatography A, 985(1), 303-312.
2. Leffingwell, J. C., & Alford, E. D. (2005). Volatile constituents of perique tobacco. Electronic Journal of Environmental, Agricultural and Food Chemistry, 4(2), 899-915.
3. Duan, J., Huang, Y., Li, Z., Zheng, B., Li, Q., Xiong, Y., … & Min, S. (2012). Determination of 27 chemical constituents in Chinese southwest tobacco by FT-NIR spectroscopy. Industrial Crops and Products, 40, 21-26.
4. YU, J. J., PANG, T. H., REN, X. H., LI, L., DAI, H. J., & LI, A. J. (2006). Research on Relationship between Neutral Aroma Constituents and Smoking Quality in Flue-Cured Tobacco [J]. Journal of Henan Agricultural University, 4, 001.
5. Mosbach, K. (1994). Molecular imprinting. Trends in biochemical sciences, 19(1), 9-14.
6. Andersson, L. I. (2000). Molecular imprinting: developments and applications in the analytical chemistry field. Journal of Chromatography B: Biomedical Sciences and Applications, 745(1), 3-13.
7. Bures, P., Huang, Y., Oral, E., & Peppas, N. A. (2001). Surface modifications and molecular imprinting of polymers in medical and pharmaceutical applications. Journal of Controlled Release, 72(1), 25-33.
8. Piletsky, S. A., Alcock, S., & Turner, A. P. (2001). Molecular imprinting: at the edge of the third millennium. TRENDS in Biotechnology, 19(1), 9-12.
9. Zhang, W., & Chen, Z. (2013). Preparation of micropipette tip-based molecularly imprinted monolith for selective micro-solid phase extraction of berberine in plasma and urine samples. Talanta, 103, 103–109.
10. Ebrahimzadeh, H., Dehghani, Z., Asgharinezhad, A. A., Shekari, N., & Molaei, K. (2013). Determination of haloperidol in biological samples using molecular imprinted polymer nanoparticles followed by HPLC-DAD detection. International journal of pharmaceutics, 453(2), 601-609.
11. Ulbricht, M. (2004). Membrane separations using molecularly imprinted polymers. Journal of chromatography B, 804(1), 113-125.
12. Sergeyeva, T. A., Slinchenko, O. A., Gorbach, L. A., Matyushov, V. F., Brovko, O. O., Piletsky, S. A., … & Elska, G. V. (2010). Catalytic molecularly imprinted polymer membranes: Development of the biomimetic sensor for phenols detection. Analytica chimica acta, 659(1), 274-279.
13. Colegate, S. M., & Molyneux, R. J. (Eds.). (2007). Bioactive natural products: detection, isolation, and structural determination. CRC press.
14. Mishra, B. B., & Tiwari, V. K. (2011). Natural products: an evolving role in future drug discovery. European journal of medicinal chemistry, 46(10), 4769-4807.
15. REN, Q., XING, H., BAO, Z., SU, B., YANG, Q., YANG, Y., & ZHANG, Z. (2013). Recent Advances in Separation of Bioactive Natural Products. Chinese Journal of Chemical Engineering, 21(9), 937-952.
16. Cheong, W. J., Yang, S. H., & Ali, F. (2013). Molecular imprinted polymers for separation science: A review of reviews. Journal of separation science, 36(3), 609-628.
17. Hu, Y., Pan, J., Zhang, K., Lian, H., & Li, G. (2013). Novel applications of molecularly-imprinted polymers in sample preparation. TrAC Trends in Analytical Chemistry, 43, 37-52.
18. Andersson, L. I. (2000). Molecular imprinting for drug bioanalysis: a review on the application of imprinted polymers to solid-phase extraction and binding assay. Journal of Chromatography B: Biomedical Sciences and Applications, 739(1), 163-173.

1

---

[1]E-mail:[email protected]; [email protected]; [email protected]

Tags: Best Essays UK, Dissertation Topic Help, Do my essay assignment in Ireland, Essay for sale Australia