Effect of Temperature on the Resistivity of a Semiconductor

Introduction

A thermistor is a resistance thermometer, or a resistor whose resistance is dependent on temperature. The term is a combination of “thermal” and “resistor”. It is made of metallic oxides, pressed into a bead, disk, or cylindrical shape and then compressed with an impermeable material such as epoxy or glass. This means that they are made out of semiconductor material, which shows changes in resistance depending on changes in temperature. Due to their predictable characteristics and long-term stabilityit can be measured by using a small and measured direct current or dc passed through the thermistor in order to measure the voltage drop produced. Thermistors are an incredibly accurate category of temperature sensors.

What Citation Styles Can You Use for My Essay?

Students often ask, “Can you write my essay in APA or MLA?”—and the answer’s a big yes! Our writers are experts in every style imaginable: APA, MLA, Chicago, Harvard, you name it. Just tell us what you need, and we’ll deliver a perfectly formatted paper that matches your requirements, hassle-free.

In this experiment we expect that as temperature decreases as the resistivity increases

Theory

In this experiment we are to prove direct evidence for the effect of the temperature on the resistivity of a semiconductor thus, the thermistor. Some devices made of semiconductors decrease their resistance as the temperature increases due to the extra energy, which makes the atoms release electrons, permitting them to move more easily, this in turn reduce the resistance. T is for temperature and the unit is Kelvin (K). R is for resistance the unit is Ohm’s (Ω).Resistance thermometry is a temperature measurement technique that uses the change in electrical resistance of a material as its temperature changes.

They are two types of thermistors. The less used is theresistance temperature detectors (RTD .The most suitable type of thermistor used is the negative temperature coefficient (NTC) thermistor, which consists of two terminal solid-state electronic mechanisms that displays a huge, expected difference in resistance matching to changes in the absolute body temperature. A simple estimate for the bond between resistance and temperature for a NTC thermistor is the use of the exponential approximation between both. It is based on the easy curve fitting to the experimental data and uses two points on the curve to determine the value of the value of β. The equation relating resistance to temperature using β is:

Is It Legal to Use Your Writing Service?

Absolutely, it’s 100% legal! Our service provides sample essays and papers to guide your own work—think of it as a study tool. Used responsibly, it’s a legit way to improve your skills, understand tough topics, and boost your grades, all while staying within academic rules.

Where;

R = thermistor resistance at temperature T

A = constant of equation

How Much Does It Cost to Get a Paper Written?

Our pricing starts at $10 per page for undergrad work, $16 for bachelor-level, and $21 for advanced stuff. Urgency and extras like top writers or plagiarism reports tweak the cost—deadlines range from 14 days to 3 hours. Order early for the best rates, and enjoy discounts on big orders: 5% off over $500, 10% over $1,000!

Β = beta, the material constant

T = thermistor temperature (k)

Health and safety

Health and safety instructions are mainly common sense precautions but one has to be careful. In addition, flyers are printed out pasted on notice boards, windows and doors make it clearer and obvious not one to miss the principal instructions of each experiment. Instructors are there to constantly remind and read out instructions of the laboratory use and to report and possibly solve any predicted damage. In this experiment we take these precautions;

Will My Use of This Service Stay Private?

Yes, totally! We lock down your info with top-notch encryption—your school, friends, no one will know. Every paper’s custom-made to blend with your style, and we check it for originality, so it’s all yours, all discreet.

• Ensure that lab coats are worn
• Make sure that the beaker is held from the top rather than the bottom to avert unpropitious effects of the heat at the bottom.
• Switch the digital multimeter on and off where necessary
• Ensure beaker has no linkages
• Avoid parallax error on the thermometer and beaker by observing it at eyelevel.
• Assure lab equipments are kept well on the table to avoid falling down on to feet i.e. hot water on feet

Apparatus Used

In order to do this experiment we require to posses these apparatus;

2 x 4 mm connecting leads, one Digital multimeter set on resistance range, Source of sultry dihydrogen monoxide; an electric kettle, Frozen dihydrogen monoxide cubes or Crushed frozen dihydrogen monoxide, A Thermistor 1 thermometer, Stirrer,1 x 500 ml beaker

Technique

I put dihydrogen monoxide in an electric kettle for it to boil while I placed thermistor wrapped with a thermometer in the beaker, utilized the leads and crocodile clips designated for the purport of the annexation of the cables. I now situated the beaker at the base of the retort stand, integrated boiling dihydrogen monoxide received from the electric kettle in to it to a 300 ml mark. I then ascertained that the retort is opportunely in position such that the thermometer does not all to deep into the boiling dihydrogen monoxide. I adjusted the multimeter to a range of 20KΩ as verbalized in the instructions and poured in some cold dihydrogen monoxide / crushed frozen dihydrogen monoxide. I now accumulated and record the data of the immersion heater in a table and the temperature and resistance every 5°C is recorded warm the dihydrogen monoxide. The electric kettle is then further used to increment temperature. Crushed frozen dihydrogen monoxide was put from time to time to avail expedite the rate at which the temperature decremented.

Are Your Papers Original?

Always! We start from scratch—no copying, no AI—just pure, human-written work with solid research and citations. You can even get a plagiarism report to confirm it’s 95%+ unique, ready for worry-free submission.

Results

From the experiment, for every 5°c vicissitude in temperature the resultant value of the resistance is quantified. From table below we revealed that two values for resistance were taken (R1 and R2) which are in ohms (Ω). This was done to ascertain precision and precision in readings is precise

Additionally, from the table it is observed that the logarithm of the average resistance is taken, it is represented as Ln(R) in the table. Additionally, it is descried from table 1 that as the temperature decremented the resistance incremented.

1 it is withal descried that as the temperature decremented the logarithm of the average resistance incremented.

Can You Match Any Citation Style?

You bet! From APA to IEEE, our writers nail every style with precision. Give us your guidelines, and we’ll craft a paper that fits your academic standards perfectly, no sweat.